Higgstec T121S-5RBE18N Touch Screen Panel

Categories	Higgstec Touch Panel
Brand	VICPAS
Model	T121S-5RBE18N
Warranty	365 Days
Shipping	DHL/FedEx/UPS/TNT/EMS/Aramex /DPEX
Touch points	Single-touch
Place of Origin	China
HMI touch glass	touch digitizer glass
HMI panel glass	touch screen monitor
Name	T121S-5RBE18N Touch Screen Panel
FOB port	Guangzhou, Shenzhen, Hongkong
Terms of Payment	Western Union, MoneyGram, T/T, Paypal, PayPal
Update Time	Nov 15,2024

Contact Now

Favorites

Detail Information

Higgstec T121S-5RBE18N Touch Screen Panel

T121S-5RBE18N touch screen
T121S-5RBE18N touch panel
T121S-5RBE18N Touch screen glass
T121S-5RBE18N Touch screen hmi
T121S-5RBE18N touch memrbane
T121S-5RBE18N touch digitizer
T121S-5RBE18N touchscreen

True Flat Resistive Touch Solution

Our True Flat Resistive touch solution combines the simplicity, versatility and durability of our 5-wire resistive technology with an attrac- tive zero-bezel desian.

The fush surface is easier to clean and there will be no dust or dirt buildup or water leakage into the bezel, making it an excellent solution for sterile or dust free environments such as medical dinics, scientific laboratories, restaurants or food processing areas. What's more, you now also incorporate features such as logos or hotkey buttons on the cover design".

Higgstec also uses a special high temperature production process for its resistive screens to fuse the silver sensor circuit onto the glass, preventing it from peeling off during extreme temperature or humidity variations, ensuring greater longevity and durability in harsh operating environments

A front cover shield (glass, fiberglass, PMMA or other material) can also be added to the front of the resistive panel for anti-abrasion and chemical resistance protection.

FAQ:

Question:Attention of Mounting Condition

Answer:
(1) The gasket support of touch panel must allocate outside of Viewable Area. Reserve enough clearance between panel surface and enclosure for normal panel operation.
To avoid pressing error, please retain enough space between surface panel and Bezel.

(2) Bezel opening must not touch Viewable Area, Bezel opening must be designed between Viewable Area and Active Area.

(3) We recommend elastic material support.

(4) Due to the conductive characteristic of the panel backside, prevent metal contact after mounting.

(5) Do not use adhesive to bond top surface (ITO Film) of touch panel with enclosure.

(6) Proper grounding of controller at all times assure normal operation.

(7) During assembly. Please take into consideration the variance in the different module designs, whether it would cause physical, cosmetic or functional damages to the touch panel, when completing the assembly.

(8) After installation，please perform 4 point and 25-point calibration.