Touch Screen Control Board Driver ETP-SAT4500G-G ETP-RAT4501-E RAP4502RPEG

Categories	Touch Screen Control Board
Brand	VICPAS
Model	Touchkit EETI eGalax ETP-SAT4500G-G ETP-RAT4501-E
touch screen repair replacement	touch panel repair replacement
FOB port	Guangzhou or Hongkong
Terms of Payment	L/C, T/T, Western Union, Paypal
Update Time	Nov 15,2024

Contact Now

Favorites

Detail Information

sThis touch panel controller provides the optimistic performance of your analog resistive touch panels for 4-wire and 5-wire models. It communicates with PC system directly though USB and RS232 connector.

You can see how superior the design is in sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operations systems, including Microsoft Windows Vista, Windows XP,2000,95/98

Windows Me, NT4.0,CE2.12 & 3.0/ NET ,DOS

Circuit Board Dimension:20mm x 68mm (0.79inches x 2.68inches)----(4-Wire)

Power Requirements：D.C.+5V (100mA typical,50mV peak to peak maximum ripple and noise)

Operating Temperature：0 to 50 ℃

Storage Temperature：-40 to 80 ℃

Relative Humidity：95% at 60 ℃

Interface：USB 1.1 Low Speed

Report rate：USB Model: Max. 160 points/sec

Response time：Max. 35 ms

Attached Cable：6' shielded cable with USB-A connector for

Regulatory Approvals:FCC-B , CE,Unaffected by EMI from other nearly CRTs

and other display devices

EMI:Unaffected by environmental EMI

Panel resistance:4 wire resistive model: 300 ~ 900 ohm

4 / 5-Wire USB

Touch Panel Controller

eGalax_eMPIA launched touch control board to meet latest Restriction of Hazardous Substances (RoHS) Directive. This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4 or 5 wire models. It communicates with PC system directly through USB connector. You can see how superior the design is in sensitivity 、accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operation systems as following.

OS	Version	Interfaces
Windows	Windows Vista, XP/2000, 9x/ME Windows CE 2.12/3.0/.net/5.0/6.0 Windows Embedded Windows XP Tablet PC edition Windows Vista Windows 7	RS232/USB/ PS2
Windows	Windows NT4	RS232/PS2
Linux	Mandrake (Mandrake 9.1/9.2/10, Mandriva 2005, Mandriva 2006), Red Hat (7.3/8.0/9.0), Fedora (Core I/II/III/IV/V/VI), Yellow Dog (3.X) , SuSE (9.2/9.3/10/10.1), Ubuntu (5.1/6.06), Debian (3.1, Kernel 2.4.x/2.6.x)	RS232/USB/ PS2 (up to Kernel 2.6.x)
Linux	Android 1.5 – Google Moblin V2 - Intel	RS232/USB
DOS	DOS	RS232/PS2
Mac	Mac OS9, Mac OS X (IBM, intel CPU)	USB
QNX	QNX RTOS v6.3	RS232/USB

Controller:

Specifications:

*USB Type Controller*
Circuit Board Dimension	20mm x 75mm (0.79inches x 2.95inches)
Power Requirements	D.C.+5V (100mA typical,50mV peak to peak
	maximum ripple and noise)
Operating Temperature	-25 to 80℃
Storage Temperature	-55 to 150℃
Relative Humidity	95% at 60℃, RH Non-condensing
Interface	USB: 1.1 Full Speed
Resolution	2048×2048 resolution
Report rate	USB: Max. 200 points/sec
Response time	Max. 20 ms
Attached Cable	180cm shielded cable with USB-A connector
Regulatory Approvals	FCC-B , CE, Unaffected by EMI from other nearly CRTs and other display devices CRTs
EMI	Unaffected by environmental EMI
Panel resistance	4 wire resistive model: 200 ~ 900 ohm 5 wire resistive model: 50 ~ 200 ohm

Product Package:

(1)

ETP-MB-R4500UPCG (4 / 5 wire USB control board)

(2)

ETP-CB-SXU00 (USB cable)

(3)

ETP-CB-4XN00 (4 pin Flat cable) or

ETP-CB-5XN00 (5 pin Flat cable)

Controller Panel Pin Assignment:

For 4-Wire Resistive Touch Panel

Pin-Out as below figure is automatically detected

For 5-Wire Resistive Touch Panel

ELO or 3M type Pin-Out is automatically detected

NC

Y+

Y-

X-

X+

NC

Controller Wafer Pin Assignment: